热等静压工艺制备的Ti-6Al-4V薄壁筒的切削加工

为了能够提高钛合金薄壁筒的加工效率,利用热等静压工艺制备了两个具有不同结构的Ti-6Al-4V薄壁筒,研究了夹具、填充泥浆和筒结构对Ti-6Al-4V薄壁筒的外圆表面粗糙度和精度的影响。结果显示,Ti-6Al-4V热等静压薄壁筒经过切削加工能够达到精度要求,填充泥浆降低了弹性回弹,提高了薄壁筒外圆精度;筒结构的内圆环和粗大端能够提高刚度,有效降低了外圆表面粗糙度值;夹具尺寸误差对圆度和同轴度影响较大,较大的尺寸误差显著降低了筒的外圆精度。     

2019年国外导航技术发展综述

近年来,国外导航技术的发展呈现出多系统融合的发展态势,结合2019年国外导航技术的发展动态,对美国、欧盟、俄罗斯、印度等国家和地区的卫星导航、惯性导航、天文导航、视觉导航、数据库匹配导航、仿生导航、量子导航和全源导航等技术发展现状进行了总结分析,并对相关技术发展进行了展望。     

基于气压高度辅助的机载自主完好性监测算法

卫星接收机自主完好性监测是指根据用户接收机的多余观测值监测用户定位结果的完好性,其目的是在导航过程中检测出发生故障的卫星,并保障导航定位精度。针对卫星接收机自主完好性监测算法可用性不足的问题,结合机载实际导航系统配置,提出了一种基于气压高度表辅助的机载自主完好性监测算法。综合利用卫星导航系统及气压高度表观测信息,建立联合系统的观测模型,推导了基于多解分离的完好性监测及保护级别计算方法。仿真结果表明,相比于传统的接收机自主完好性监测算法,该算法在可见星为5颗时仍能识别故障卫星。该算法具有更好的故障检测能力及可用性,能有效提高卫星导航系统的完好性监测性能,从而保证卫星导航系统的精度和可靠性。     

基于覆盖圆的太阳同步回归轨道卫星目标轨迹调整方法

遥感卫星星座在环境监测、地理测绘等领域运用中,需要考虑目标轨迹分布的优化问题.轨迹分布与星座的重访能力和进出站间隔保持等应用需求密切相关.目前对星下点轨迹分布的优化和调整还缺乏准确实用的方法,存在卫星数目增多带来的计算量增加问题和对多种需求综合考虑不够的问题.为了克服现有技术的不足,解决太阳同步回归轨道遥感卫星星座的目...     

根据两颗导航星信息估计捷联惯导系统误差的一种方法

针对高机动短时间飞行的飞行器,介绍了一种根据它相对2颗导航卫星的伪距离和伪速度信息,估计捷联惯导系统定位和定速度误差的方法.考虑到由确定飞行器相对每颗星的径向距离和速度的非线性方程施加的约束,根据这些误差矢量长度最小值的条件确定误差值.用空间解析几何法得出了计算捷联惯导系统误差估值的最终算法,这种算法能给出非线性最小值问题的精确解.     

Development,integrated investigation,laboratory and in-flight testing of Chibis-M microsatellite ADCS

Design, analytical investigation, laboratory and in-flight testing of the attitude determination and control system (ADCS) of a microsatellites are considered. The system consists of three pairs of reaction wheels, three magnetorquers, a set of Sun sensors, a three-axis magnetometer and a control unit. The ADCS is designed for a small 10–50 kg LEO satellite. System development is accomplished in several steps: satellite dynamics preliminary study using asymptotical and numerical techniques, hardware and software design, laboratory testing of each actuator and sensor and the whole ADCS. Laboratory verification is carried out on the specially designed test-bench.In-flight ADCS exploitation results onboard the Russian microsatellite “Chibis-M” are presented. The satellite was developed, designed and manufactured by the Institute of Space Research of RAS. “Chibis-M” was launched by the “Progress-13M” cargo vehicle on January 25, 2012 after undocking from the International Space Station (ISS). This paper assess both the satellite and the ADCS mock-up dynamics. Analytical, numerical and laboratory study results are in good correspondence with in-flight data.     

TC4钛板飞行器蒙皮零件热校形研究

论述了金属板料热校形机理一一主要是高温下应力松驰及材料的高温软化效应．并根据此原理对某飞行器TC4钛板零件进行热校形，其校形结果达到预期效果。     

嫦娥一号卫星星地时差校正量计算方法研究

影响月球探测卫星星地时差的因素较多，文章介绍了其计算模型，并对其中的模糊距离进行了详细分析。通过对试验数据的分析，运用最小二乘法，分别建立了集中校时量和均匀校时量计算模型。实际结果表明：运用此两种校时模型和方法可以方便有效地控制嫦娥一号卫星的星地时差，并使其在一段时期内保持在5ms范围以内。     

Zenith Pass Problem of Inter-satellite Linkage Antenna Based on Program Guidance Method

While adopting an elevation-over-azimuth architecture by an inter-satellite linkage antenna of a user satellite, a zenith pass problem always occurs when the antenna is tracing the tracking and data relay satellite （TDRS）. This paper deals with this problem by way of, firstly, introducing movement laws of the inter-satellite linkage to predict the movement of the user satellite antenna followed by analyzing the potential pass moment and the actual one of the zenith pass in detail. A number of specific orbit altitudes for the user satellite that can remove the blindness zone are obtained. Finally, on the base of the predicted results from the movement laws of the inter-satellite linkage, the zenith pass tracing strategies for the user satellite antenna are designed under the program guidance using a trajectory preprocessor. Simulations have confirmed the reasonability and feasibility of the strategies in dealing with the zenith pass problem.     

航天器的数字化总装设计研究

文章总结了航天器数字化总装设计的基本思路、方法和经验，阐明了数字化总装设计所发挥的作用和意义。